STEP 1: Inspection / Survey 

​

• Soiling: Check depth of soil & signs of permanent staining.

• Fixings: Poor fixings may increase risk of shrinkage

• Seams: Poorly jointed seams may split during cleaning through water or heat.

• Backings: Type of backing may influence the method of cleaning. Some backings are prone to shrinkage.

​

From this information we will decide on the system and method of cleaning to be employed

STEP 2: Fibre Test

​

• Fibre identification will help to determine use of correct cleaning solution. It will also assist pre-judgement on whether stains are removable.

STEP 3: Dye Test

​

• All colours must be chemically pH tested to ensure use of correct cleaning solution.

STEP 4: Comb Pile

​

• Comb pile to separate and release matted pile for more effective dust extraction.

STEP 5: Vacuum

​

• Power vacuum to extract dust grit and other dry soil to prevent turning dust into muddy residue.

STEP 6: Treat Stains

​

• Stains should be treated prior to main cleaning operation to ensure that full depth of stain has been removed.

STEP 7: Spray Pre-Treatment

​

• Use specially formulated Prochem carpet cleaning solutions to dissolve soiling. Agitate to depth of soil.

STEP 8: Deep Cleaning

​

• Clean carpet overall using specialist Prochem system and method decided at inspection stage.

STEP 9: Hand Cleaning

​

• Clean all edges, stairs and other inaccessible areas by hand, using appropriate methods.

STEP 10: Realign Pile

​

• Pile must be correctly set while damp. ​​

• Replace furniture ONLY when necessary and place on protector pads or foils.

• ​Ensure adequate ventilation and/or introduce mechanical air mover.